Mar 2, 2023

The seasons are changing once again and with new road conditions and extreme changes in temperature, your ride could probably use some maintenance! One of the easiest ways in which we can keep our rides in peak condition is by staying on top of your vehicle’s fluid levels! And it’s easier than you think to do so! Take a look at Younger Mitsubishi’s guide below, and get your ride back on the road and better than ever! Don’t have the time or tools to get the job done on your own? Schedule your service appointment at our Mitsubishi Service Center and let our talented technicians handle it for you!

Younger Mitsubishi’s Car Fluid Level Guide: 

Engine Oil:

  • Your engine needs oil in order to keep moving parts lubricated and working properly. To check your oil, make sure your engine is cool before popping open the hood. Pull out the dipstick and wipe it on a clean rag, reinsert the stick all the way back into the tank. Pull out the stick again and judge the oil levels by where it reaches on the dipstick, there will be a notch that indicates what a safe oil level is. If your oil hits below the notch, check for the specific type of oil and add some yourself.

Transmission Fluid:

  • Transmission fluid is important because it keeps your transmission lubricated and will save you from expensive repairs. The second dipstick in your engine is for this fluid. Like we did to check the engine’s oil, you will have to remove the dipstick, wipe it off, and reinsert it back into the tank. Pull it back out and examine where the fluid hits on the stick, it’s also a good idea to check the quality of your fluids. Wipe a small amount onto your fingers, if the fluid has a pink or clear look to it, it is fine. If the fluid smells burnt or has particles in it, it is time to swap it out.

Brake Fluid:

  • From a safety standpoint, this is one of the most important fluids. Brake fluid basically keeps you from running into other cars and objects. You’ll find the brake fluid reservoir toward the back under your hood, be sure to clean off the outside of the compartment so any dirt or dust doesn’t enter the reservoir. Open up the cap and look inside to see where the fluid level is. It should be about a half-inch from the cap. If it is lower than that, check your owner’s manual for what fluid you should use. Also, if the fluid has a dark tint to it, bring your vehicle into our service department for a change of fluids.

Power Steering Fluid:

  • It’s important to have control over your car and this fluid keeps the right parts lubricated to ensure a safe driving experience. This reservoir is typically found under the hood, on the passenger side with a cap that will likely say “steering” on it. Many cars have a light colored reservoir so you can see the level of fluid without removing the cap. If your car has a dark reservoir, clean off the cap before opening to avoid dirt particles from entering the system. Open up the cap and use the dipstick the same way as we did before, if the fluid is low, you can easily add more. Also, if your fluid level is low check for a leak in the system.

Windshield Washer Fluid:

  • One important part of driving is being able to see out the windshield, this fluid is key to ensure that happens. Most vehicles have a clear washer fluid tank that will be labeled either “washer” or “windshield.” If you need to add more, simply pop the cap off and pour into the tank. Do not use soap and water if you are completely empty!! But, the window cleaner that you use at home can work until you fill up with the real stuff.